Thursday, August 18, 2011
Icy News: Corsair Adds 60GB and 90GB SSDs to Force 3 and Force GT Lines
"Corsair has added 60GB and 90GB capacities to their family of Force GT and Force 3 SSDs. The 90GB drives are the first SandForce SF-2200 SATA 6Gb/s SSDs to ship thus far. While they may be small in capacity, these SSDs still offer tremendous speeds, with the 60GB Force GT cranking out 555 MB/s reads.
In terms of specs the 60GB and 90GB Force 3 SSDs look nearly identical to the rest of the Force 3 drives, leveraging SandForce SF-2281 processors and 25nm asynchronous NAND to deliver 550 MB/s read speeds. The 90GB capacity offers and 500 MB/s writes and 85,000 IOPS, where the 60GB turns 490 MB/s writes and 60,000 IOPS.
On the Force GT (Force GT Review) side of the coin, the 60GB and 90GB also leverage SandForce SF-2281 processors, but this time with 25nm synchronous NAND. Both of the new capacities offer 555 MB/s reads; the 90GB drive posts 505MB/s write speeds and 85,000 IOPS, while the 60GB drive 495 MB/s writes and 80,000 IOPS.
The new SSD capacities help open new consumer markets that have been holding back on a SATA 6Gb/s SSD purchase due to budget constraints. The 60GB and 90GB drives are ideal in dual-drive scenarios where the speedy SSD houses the operating system and frequently used programs. All four of the new drives are available now with an MSRP of $159 for the Force Series 3 90GB and $199 for the Force Series GT 90GB." - via Storage Review
Now with the Corsair Force GT released, this is a great addition to the many other SATA III drives that are out there. The read and write speeds are also no slouch leaving almost no room for the SATA III maximum bandwidth. However, is the starting cost of $159 worth the speed? Will you purchase? If so, why? Let us know!
張貼者： ICY DOCK