ICY News: Toshiba Unveils Q-Series Pro SSDs with New-Generation NAND Flash Memory.

"Toshiba’s Digital Products Division (DPD), has announced the Toshiba Q-series Pro solid-state drives. The new drives will serve high-performance desktops and laptops and will replace previous-generation Q-series SSDs. Keeping in mind that performance of modern solid-state is very close to limitations of Serial ATA-6Gb/s interface, it is illogical to expect Q-series Pro to be significantly faster its predecessor.

“Toshiba’s comprehensive ecosystem of devices positions the company at an advantage when understanding consumer needs for storage. The Q Series Pro PC Internal Solid State Drive offers industry-proven caliber and authenticity with leading performance, speeds and capabilities,” said Maciek Brzeski, vice president of product marketing and development of branded storage products at Toshiba America Information Systems.

Toshiba did not reveal any technical details about the new Q-series Pro solid-state drives, but said they will be available in 128GB, 256GB, and 512GB capacities. Moreover, the company even did not indicate how much faster the Q Pro is compared to Q family of drives."

Link to the entire Article: Toshiba Unveils Q-Series Pro SSDs with New-Generation NAND Flash Memory.

ICY TIP: Maximize Storage Density - Build a Six 2.5" SSD/HDD RAID server with MB996SP-6SB

Maximize Storage Density - Build a Six 2.5" SSD/HDD RAID server with MB996SP-6SB According to Moore’s Law, the number or transistors on integrated circuits doubles approximately every two years (18 months). However the speed of advancement is not outpacing the growing demand for faster access of greater amounts of data. To keep up with this demand, greater space storage is important to today’s data servers. The problem many servers face today is not able to fit enough storage capacity into the limited amount of space while keeping your data safe. It seems that the 2.5” hard drive and SSD are the answer as they are significantly smaller, lighter and use less energy compare to the 3.5” hard drive. The question is how you optimize the space you have in your computer chassis, to fit as many as 2.5” HDD / SSD as possible. ICY DOCK’s solution is to use 2.5” hard drive disks (HDD) or Solid State disks (SSD) with the ToughArmor MB996SP-6SB 6x2.5” SATA HDD Hot Swap Mobile Rack. This model allows six 2.5” HDDs/SSDs of 7mm to 9.5mm height to fit into a single standard 5.25” bay. The MB996SP-6SB allows for a dense yet highly efficient use of HDDs/SSDs. Why 2.5” HDDs over 3.5”HDDs? Though 2.5” HDDs/SSDs are smaller in size than 3.5” drives, 3.5” drives have capacities up to 4TB while the highest amount currently for a 9.5mm height 2.5” HDD is 1.5TB. However, in one 5.25” bay, you can only fit one 3.5” drive which keeps your options limited. With the MB996SP-6SB, you can fit drives such as the HGST Travelstar 5K1500 1.5TB 2.5" Hard Drive for a total of 9TB of storage space. With 6 drives and a higher storage capacity, you have the options of a high performance compact storage unit with RAID (redundant array of independent disks) function. Space Saving with RAID Most servers have precious data and normally use a RAID function to protect the data. Typically, RAID functions require a big amount of physical space to fit more storage capacity with redundant drives for data protection. For example, RAID 5 and RAID 6 normally take up a lot of physical space because a minimum of three hard drives are required for RAID 5 and a minimum of four hard drives are required for RAID 6. However with 6 x 2.5” HDD in our MB996SP-6SB, you have the option of using certain RAID functions such as RAID 5 or RAID 6 which will give you better performance yet great data protection all in a 5.25” bay. RAID 5 uses block striping with a distributed parity which gives it faster read/write speeds (speeds similar to RAID 0) while protecting the data. With RAID 5, the increased performance speed depends on the number of drives. The more drives the faster the speed. So a 6 x HDDs in RAID 5 will be faster than 3 x HDDs in RAID 5. When using 1.5TB HDDs in our MB996SB-6SB, the total capacity with RAID 5 will be 7.5TB with performance speeds up to 5x faster than a single drive and a fault tolerance of one drive. Using RAID 6 will give you twice data protection but you will lose some performance and storage capacity compared to RAID 5. So with the 1.5TB HDDs in our MB996SB-6SB, there will be a 6TB capacity and performance speeds of up to 4x faster than a single drive but a fault tolerance of two failed drives. With the two drive failure tolerance, your data is protected even if a second drive fails while the array is rebuilding after one drive failed or when a wrong disk is hot-swapped due to operator error. Though RAID 5 has slightly better performance, RAID 6 is the better option when a large and reliable storage is required. RAID 5 vs RAID 6 Comparison Chart RAID TYPE DESCRIPTION MINIMUM # OF HDDS REQUIRED SPACE EFFICIENCY FAULT TOLERANCE READ/WRITE PERFORMANCE RAID 5 Block-level striping with distributed parity 3 1-1/n 1 drive (n-1)X RAID 6 Block-level stripping with double distributed parity 4 1-2/n 2 drives (n-2)X Performance Comparison with 1.5TB HDD 4x 2.5” HDD 1.5TB JBOD (NO RAID) RAID 5 RAID 6 STORAGE CAPACITY 6TB 4.5TB 3TB FAULT TOLERANCE NONE 1 DRIVE 2 DRIVES PERFORMANCE 1X SPEED 3X SPEED 2X SPEED 6x 2.5” HDD 1.5TB JBOD (NO RAID) RAID 5 RAID 6 STORAGE CAPACITY 9TB 7.5TB 6TB FAULT TOLERANCE NONE 1 DRIVE 2 DRIVES PERFORMANCE 1X SPEED 5X SPEED 4X SPEED Improve Performance with SSD With solid state drives (SSD) becoming better and cheaper, many are turning to them to replace their current HDD solution. SSDs may have slightly lower capacity and a higher price, but the added benefits they provide outweighs their drawbacks. With a small size, SSDs save physical space yet have lower power usage, generates less heat which lengths drive lifetime, better shock protection and of course, faster read/write speeds compared to HDDs. When Storagereview.com tested our MB996SP-6SB with six 200GB Kingston SSDNow E100 enterprise SSDs, they measured a total write speed of 1,395MB/s and a read speed of 3,240MB/s. They also tested random 4K transfers and received faster random access speeds with write speeds of 262,628 IOPS and read speeds of 341,114 IOPS when performing random 4K transfers. This means that SSDs, along with the MB996SP-6SB, are great for highly used servers where random access speeds are important. With the MB996SP-6SB all metal build and 6 SAMSUNG 840 EVO MZ-7TE1T0BW 2.5" 1TB SATA III TLC SSD in RAID 5, you can have a robust, compact 5TB server with excellent data protection in the space of a 5.25” bay. The MB996SP-6SB is designed to fit any 2.5” HDD/SSD in both 7 & 9.5mm drive height. So whether you prefer using the newer 7mm height SSD such as Intel 530, Crucial M500, Samsung 840, Mushkin Enhanced Chronos, Seagate 600 & Kingston SSDNow or any standard 9.5mm height 2.5” SSD such as Intel 335 / 520 series, Crucial C300 / M4, OCZ Vertex 4 & Kingston HyperX, it will all mount with the MB996SP-6SB. Why Tough Armor? The MB996SP-6SB is part of our ToughArmor series mobile rack. The designs are great for industrial, military and medical systems as well as high performance server builds. The ability to fit 6 x 2.5” HDD into a 5.25” bay allows support for a wide range of applications in a high capacity and space saving design. Not only can it run RAID 5 and RAID 6, it allows the option of doing different combinations of RAIDs such as putting 4 drives in RAID 0 plus a RAID 1 array for back up. The MB996SP-6SB is capable of holding up in various environments with the heavy duty full metal construction. The superior heat dissipation of the metal body along with anti-vibration technology and EMI grounding provides a stable environment for the hard drives or SSDs used and improves their lifespan and reliability. As a product for 2.5” small form factor, the MB996SP-6SB and other similar products consists of many small parts and having durable parts is very important. However, unlike the MB996SP-6SB which has an all metal build, other similar products use plastic parts which will break much easier than metal. The all metal build of the MB996SP-6SB is a huge advantage when it comes to product durability and protecting your costly investments inside. Lastly, like all of our products, the MB996SP-6SB comes with our 3 year warranty. MB996SP-6SB Key Features: ‧ Full metal construction from the inside out which is perfect for rugged applications and is compliant with flammability requirements ‧ Drives are fully removable & hot?Swappable ‧ High density design, fits up to 6 x 2.5” SSD in a single 5.25” device bay ‧ Support latest 2.5” SSD or HDD from 7mm to 9.5mm height ‧ Covered by 3 year warranty with global customer support ‧ Manufacturer direct support - provided by ICY DOCK Please check out our ToughArmor series for even more build options. 1 x 2.5” SSD or Hard Drive Mobile Rack in 3.5” Floppy Bay MB991IK-B MB991SK-B 1 x 2.5” SAS/SATA HDD/SSD Fits 7 -15mm Height Drive 1 x 2.5” SATA HDD/SSD Fits 7 -15mm Height Drive Product Page Product Page Data Sheet Data Sheet 2 x 2.5” HDD/SSD Mobile Rack in 3.5” Floppy Bay 2 x 2.5” HDD/SSD + 1 x ODD in 5.25” Device Bay MB992SK-B MB994IPO-3SB 2 x 2.5” SATA HDD/SSD Fits 7 - 9.5mm Height Drive 2 x 2.5” SAS/SATA HDD/SSD Fits 7 – 15mm Height Drive 1 x SATA Slim Optical Drive Product Page Product Page Data Sheet Data Sheet 4 x 2.5” HDD/SSD Backplane in 5.25” Device Bay MB994SP-4S MB994SP-4SB-1 4 x 2.5” SAS/SATA HDD/SSD Fits 7 - 15mm Height Drive 4 x 2.5” SATA HDD/SSD Fits 7 - 15mm Height Drive Product Page Product Page Data Sheet Data Sheet 6 x 2.5” HDD/SSD Backplane in 5.25” Device Bay Question? MB996SK-6SB 6 x 2.5” SATA HDD/SSD Fits 7 -15mm Height Drive Tech Email: tech@icydock.com Sales Email: sales01@icydock.com Product Page Live Chat Support Data Sheet Tel: 626.956.8800

ICY DOCK International Sales : +886 2 2999-3251 Ext. 804 e-mail : roy@cremax.com.tw Skype: roycremax

ICY News: Seagate releases industry's thinnest 2TB HDD

Seagate today announced it is shipping its highest density laptop drive, a standard 9.5mm thick model with up to 2TB of capacity.

"The M9T drive is also available in a 1.5TB model. Both the 2TB and 1.5TB drive models use a 6Gb/s SATA interface. While there are 2TB laptop drives today, they come in 12.5mm and 15mm form factors, which are around a half in inch thick. At 9.5mm, the M9T is about .37-in thick. Laptop drives are standard in 7mm and 9.5mm form factors." 

Desktops won't have any issues using them, however if your case does not have 2.5-inch bays or 2.5" to 3.5" converters.

See: Full Article

Introducing the ICY DOCK EZ-Fit Lite MB290SP-B 2 x 2.5” to 3.5” Drive Bay SATA/IDE SSD/HDD Mounting Kit / Bracket / Adapter

The EZ-Fit Lite MB290SP-B is a great choice if you’re looking to install 1 or 2 SSDs/2.5” HDDs into a single 3.5” bay. If you’re looking for storage density, compatibility, flexibility, and durability without the hassle of a complicated installation, go with the EZ-Fit Lite MB290SP-B. It’s never been easier to effortlessly install 2.5” drives in a system. We, IcyDock, put a lot of thought into the design to fulfill the needs of our customers, whether they’re building Home Theater Systems (HTPC), Gaming PCs, or Mini-IPX systems. Our EZ-Fit Lite MB290SP-B certainly doesn’t disappoint. Effortless Installation IcyDock continues to raise the level of exceptional craftsmanship and design that our products are renowned for. The EZ-Fit Lite is our newest 2.5” HDD/SSD bracket and we’ve pulled out all the stops to engineer this unit to be both user-friendly and highly advanced. The EZ-Fit Lite accepts up to 2 x 2.5” SATA, or IDE SSD/HDD drive from 7mm to 9.5mm in drive height, which uses a completely new flex design system to simplify our drive installation process –all you need to do is insert the drive, and push inwards until it “clicks.” Our EZ-Fit Lite MB290SP-B has self adjusting tabs on the side that automatically conform to different drive heights (7mm and 9.5mm) to securely lock it in place. Lastly, the eject button allows for quick hard drive swapping in a matter of seconds without removing the entire bracket from the chassis. The best part about this device is it’s completely tool-less drive installation –just insert the drive and you’re set. It doesn’t get any easier. Brilliant Design We have blended a combination of flexibility & compatibility to create the EZ-Fit Lite MB290SP-B - a product that cannot be replicated by any of our competitors. The EZ-Fit Lite MB290SP-B provides a whopping 60 screw holes to accommodate 3.5” bay installation in practically every computer chassis. Compare this with a standard 3.5” hard drive that only offers a measly 10 screw holes, and you’re offered a lot more options. In addition to 60 screw holes, there are 12 different ways you can mount the EZ-Fit Lite MB290SP-B in your system in comparison to the 2 positions you get with a standard 3.5” drive; this gives you option to finely tune and adjust your drive installation. There are screw holes located both on top of the unit and on bottom to give you extra compatibility. Furthermore, the plethora of screw holes provides a backup measure in case of installation failure. Unbelievably Lightweight with Remarkable Cooling Our EZ-Fit Lite MB290SP-B is constructed with highly robust ABS plastic and fuses desirable traits such as durability and lightweight. One piece construction means there are less moving parts to be concerned with, which in turn means it’s less likely break. Additionally, creating a one-piece design makes manufacturing this unit very cost efficient and allows us to pass the savings onto our customers. The frame has a weightless flexible stabilizer that secures the drive in place and provides shock absorption and anti-vibration properties –great for protecting your drives against impact. Open air designs allow the drive to be cooled by the fans in your chassis. With our skeletal design, the EZ-Fit Lite MB290SP-B allows airflow in all the crucial areas of the drive which helps drive performance. Elevated ridges on the platform raise the drive just enough to allow heat dispersion keeping your SSD/HDD cooler. We’ve also included side vents on the bracket to let heat escape from the drive Suggested Applications Desktop PC, Gaming PC, Home Theater PC, Mini-ITX Systems, Home Server Systems Key Features * Durable one-piece design * Anti-Vibration design for improved reliability * Fits 2 x 2.5” SATA/IDE SSD/HDD into one 3.5” drive bay * Compatible with 2.5” SSD & HDD with 7mm to 9.5mm drive height * Quick release eject mechanism for hassle free tool-less drive installation * Universally designed screw placement for maximum compatibility * 60 screw holes provide maximum flexibility of installation Quick links: MB290SP-B Product Page MB290SP-B Product images MB290SP-B Datasheet ICY DOCK Tel : +886 2 2999-3251 Ext. 804 Fax: +886 2 2999-3478 Sales e-mail: roy@cremax.com.tw Support e-mail: marketing@cremax.com.tw

MB994SP-4SB-1 & MB991SK-B ToughArmor review - posted by overclock.net

IcyDock MB994SP-4SB-1 & MB991SK-B: Drive bay domination continues

MB994SP-4SB-1 -- Four for one, and one for all The 4SB is a 5.25” form-factor drive bay that is able to accommodate up to 4 x 2.5” SATA drives. IcyDock offers an even denser array with the MB996SP-6SB (not surprisingly, storing 6 drives) but, unlike the MB996, the trays for this series support drives up to 15mm in height. MB991SK-B -- You weren’t using that 3.5” bay anyway The 991SK-B is a 3.5” bay device that can fit a single drive. It uses the same size tray as the 4SB. The tray is lockable for convenient way to make sure the drive doesn’t walk off or get ejected unintentionally. With almost complete disappearance of 3.5” floppy drives from the modern PC, it only makes sense to put that empty location to good use for extra storage..........Read More ToughArmor MB991SK-B Product Page: http://www.icydock.com/goods.php?id=162 ToughArmor MB994SK-4SB-1 Product Page: http://www.icydock.com/goods.php?id=142

ICY News: Western Digital's HGST Announces Its New Ultrastar He6 Drives

6TB
3.5-inch Helium Platform Enterprise Hard Drive

• World’s first helium HDD – Patented HelioSeal™ technology enables this new building block for future growth

• Industry’s first 6TB HDD – Innovative 7Stac™ disk design enables the world’s highest capacity

• TCOptimized™ platform – Delivers higher capacity, lower power, cooler and quieter operation in a standard 3.5-inch form factor

The reduction in turbulence for the spinning disk allows HGST to offer a seven-disk design in a traditional 3.5-inch form factor. In addition to being the world’s first helium-filled hard drive, HGST Ultrastar He6 is also the first hard drive in the industry to offer a 6-terabyte capacity. This design delivers a 50% capacity gain and still reduces the energy needed to run the drive by up to 23%.


Read more at: HGST Ultrastar He6

ICY News: Toshiba Introduces Enterprise-Class SSD with 1.1GB/s Throughput.

Toshiba Reveals Enterprise SSD with Up To 800GB/s Capacities

"Toshiba Corp. has introduced its latest enterprise-class solid-state drives (eSSDs) that boast high capacities as well as extreme speeds. The new Toshiba PX02SS eSSDs will provide up to 800GB of storage space and up to 1.1GB/s data read speed. The eSSD is designed for various write-intensive enterprise applications and is ideally suited for large workloads, such as data processing and online transactions....Read More"